Allworx Phones
    AT&T Corded Phones
    Avaya Phones
    Cisco Phones
    Digium Phones
    FortiFone Phone
    Grandstream phones
    Mitel / Aastra Phones
    NEC Phones
    Nortel Phones
    Panasonic Phones
    Polycom Phones
    ShoreTel Phones
    SNOM Phones
    Unify (Siemens) Phone
    Yealink phones
    Zultys Phones







Home > Compatible Phone Brands > Digium IP Phone

Wired Digium Phone Headsets With Mics

Tired of your phone cutting out? With corded Digium headsets from OvisLink, you can rest assured you’ll never have to deal with poor phone call quality again. Our specially designed call-center headset models for Digium IP phones are guaranteed to provide you with the comfort and quality you need to work on the phone day in and day out. A wired headset for a Digium phone works best when paired with the proper Digium IP phone. When you use the right headset for the right phone, we guarantee you’ll be astounded by the crystal-clear voice quality.


High-Quality, Comfortable Wired Digium Headsets

OvisLink headsets are specifically designed for users who work in call centers, sales departments, and anywhere else that requires long hours on the phone. The rotatable microphone boom lets users easily switch their speaker to either the left or right ear. With an over-the-head design and leatherette ear cushion, users can wear our headsets for long hours every day and still feel comfortable. Key wired Digium headset features include:
Acoustic shock protection
Noise cancelation
Leatherette ear cushion
Flexible microphone boom
Rotatable microphone boom (for single-ear model, user may switch the speaker to either the left or the right ear)
Adjustable headband
Tangle-free coiled quick-disconnect cord


Each Digium phone headset with mic includes two main parts: the upper part (the headpiece) and the lower part (the connecting cord). The upper part includes a single earpiece or dual earpieces, a headband, a microphone, and an upper cord. The lower part is the quick-disconnect cord with an RJ9 connector that connects the headpiece to a Digium IP phone headset jack. With a quick-disconnect cord, users can easily disconnect the headpiece from the lower cord when they need a break.

Read on below to find helpful tips on how to choose the right headset model for you, how to use the headset with your phone, and even more.
Sort By:
Page of 1
Digium IP Phone Single-Ear Headset
Digium IP Phone Headset
Compatible with Digium Phones for Switchvox:
D40/45, D50, D70

Unit Price 56.95
Qty Add
Digium IP Phone Dual-Ear Headset
Digium IP Phone Headset, Dual Ear
Compatible with Digium Phones for Switchvox:
D40/45, D50, D70

Unit Price 69.95
Qty Add
Call Center Headset Training T Adapter
Call Center Headset Training T Adapter
  • Connect two headsets at the sometime.
  • Mute button for each headsets.
  • Only compatible with OvisLink call center headsets with RJ9 headset jack (OvisLink headset with RJ45 headset jack, 2.5mm headset jack are not compatible with this training adapter)

Unit Price 25.95
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
   
 
How to choose the right headset model for your Digium IP phone.
    From the above descriptions, you should be able to find your Digium IP phone's series and model. Two headset models are compatible with your phone: a single-ear headset and a dual-ear headset. Both headsets are comfortable and provide first-rate quality audio. However, someone who frequently consults colleagues or works at home may prefer a single ear headset, while those who need to keep 100% of their focus on their phone conversations might prefer a headset with dual earpieces.

Do you need to purchase any adapter or amplifier to use the headset?
    No, you don't need to purchase any adapter or amplifier. The headset models come with a quick-disconnect cord that is designed to connect directly to Digium IP phones for maximum audio quality.

Quick instruction:

  • How to install the headset.
    OvisLink headsets do not need any installation when used with Digium IP phones. Simply connect the headset directly to the phone jack, and you’re good to go. Digium IP phones’ headset jacks are located at the back of the phone (next to the handset jack).

  • Headset button:
    To make calls, answer calls, switch among headset, handset, and speaker, use the headset button on the Digium IP phone's keypad.

  • How to use headset to dial a call.
    Press the headset button on the Digium IP phone's keypad to hear a dial tone from the headset's speaker. When you hear the tone, you may dial the telephone number.
  • How to answer an incoming phone call.
    When the phone rings, press the headset button on the Digium IP phone, and the telephone call will be connected to the headset.
  • How to hang up the phone.
    When you need to hang up the call, press the headset button again, and the call will be disconnected.
  • How to switch between headset and Digium IP phone's handset.
    While using the headset, pick up the handset, and telephone audio will be switched to the handset.While using the headset, pick up the handset, telephone audio will be switched to the handset. While using the handset, press the headset button on Digium IP phone keypad, telephone audio will be switched to the headset. Then you may place the handset back to the hood.
  • How to switch between headset and Digium IP phone's speaker phone function.
    While using the headset, press the speaker button on the Digium IP phone's keypad to switch telephone audio to the phone's speaker function.
    While using Digium IP phone's speaker function, press the headset button on the keypad to switch telephone audio to the headset.
  • How to adjust the headset's volume.
    OvisLink headset volume is controlled by the phone. There are two volume buttons on Digium IP phones' keypad: volume and volume . Press the volume to decrease the headset volume and the volume to increase the headset volume.

Training Adapter Quick Instruction:
      1. Connect OvisLink headset to port A and port B at the training adapter.

      2. Set the switch to "2" position at the other side of the truing adapter next to the "TEL" port. If you

      3. Connect the "TEL" port at the training adapter to Digium IP phone's headset jack with the short RJ11 cord that comes with the headset. Now the two headsets are connected to the Digium IP phone.
      4. Press the mute button once to mute the headset's microphone connected to the coordinated port. Press the same mute button again to release.



    Training Adapter Problem and Solution:

    Problem: When you press the mute button, the speaker of the headset connected to the coordinated port muted.
    Reason: The switch next to the TEL port is on the wrong position.
    Solution: Set the switch next to the TEL port to position 2 to solve the problem.



More questions?

Send email to support@ovislink.com